8
Pause Function
The Pause command may be used if the phone is connected to certain types
of PABX or to any network where a pause is required.
Note: No more that 3 pauses should be inserted consecutively, otherwise the
telephone may not function properly.
• Lift handset
• Dial any digits required before the pause
• Press REDIAL / PAUSE button
• Dial remaining digits
Redial Function
To dial a number, lift the handset, wait for the tone and then key in the number
required.
If the number dialled is busy, obtain a new line - by replacing the telephone
handset and then lifting it again. Press the button labelled REDIAL / PAUSE and
the last number that you dialled will automatically be redialled.
To Next Page
Loading...
