16 Cleanica 360
™
Problem Possible Reason Possible Solution
Reduced steam or no steam
Water Tank may be empty Fill the Water Tank with water
Steam nozzle may be blocked Clean the steam nozzle
There is no power to the appliance Make sure the appliance is plugged in
The Steam Button was not pressed Press the Steam Button
The Steam Control Knob is set to “MIN” Turn the Steam Control Knob clockwise
The appliance will not turn on
Blown fuse or breaker Replace the fuse or reset the breaker
Power cord not plugged in Plug the power cord into a working power outlet
Internal fuse is blown
Contact customer service using the contact information
on the back of this manual
Troubleshooting
Use the troubleshooting guide as a rst step to
resolve any issues you may be experiencing. Contact
customer service using the contact information on
the back of this manual for any servicing that requires
disassembly of the appliance.
WARNING: To reduce risk of personal injury,
unplug the appliance and allow it to cool before
troubleshooting.
To Next Page
Loading...