10 Cleanica 360
™
Assembly
1. Slide the Handle Connector into the Handle Tube
until it clicks into place.
2. Slide the Handle Tube into the Main Body until it
clicks into place.
3. The Handle can be removed from the Main Body for
storage by pressing the Handle Tube Button.
Attaching the Handle
1. Slide the bottom end of the Main Body onto
the Steam Head until the Steam Head Spindle clicks
into place.
2. The Steam Head can be removed from the Main
Body by pressing the release button near the Steam
Head Spindle.
Attaching the Steam Head
To Next Page
Loading...