Page 5
SETUP INSTRUCTIONS
1
Insert the debris bag (4),
into the vacuum body (3).
3
2
Install the vacuum body
cover (5) onto the vacuum
body (3). Turn the cover (5)
clockwise to securely lock
it to the vacuum
body (3).
Attach the desired cleaning head accessory to the vacuum body
cover:
a. Use the flat vacuum nozzle (8) to pick up heavy and/or mid-large particles
such as sand, stones, etc; and also to maneuver around tight corners or
pool edges.
b. Use the vacuum head brush (6) to pick up fine and/or small debris such as
dust and dead algae on the bottom of the pool floor.
Note: Make sure the ridge on the vacuum body cover (5) attachment end
matches the groove on the flat vacuum nozzle end or vacuum head brush
end.
To Next Page
Loading...
Need help?
General
