Page 7
SETUP INSTRUCTIONS (continued)
8
Place the whole assembled
product into the water.
Fill up the vacuum hose (13)
with water by submerging the
hose into the water slowly to
remove all of the entrapped air
from the hose. TIPS: Starting
from the end closest to the
vacuum body, submerge the
vacuum hose vertically into
the water slowly, section by
section.
Quickly attach the other end
of the vacuum hose (13)
filled with water to the
adaptor (9).
9
10
11
Pool floor
When the vacuum hose (13)
is filled with water, the water
will flow out from the other
end of the hose.
Water
Pool Floor
Water
To Next Page
Loading...
Need help?
General
