352
PO
S AVE THESE INSTRUCTIONS
(352PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 12/16/2021
English
Page 6
When ordering parts, be sure to quote the model number and part numbers.
PARTS (continued)
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
REF.
NO.
DESCRIPTION QTY.
PART NO.
4 ADULTS 6 ADULTS
1 CONTROL BASE 1 13031 13031
2 SIDE COVER HINGE BASE 2 12771D 12771D
3 SIDE COVER HINGE FIXER 2 12772D 12772D
4 CONTROL BASE SIDE COVER 2 12770D 12770D
5 CONTROL PANEL 1 13035 13035
6 CONTROL PANEL BOLT WRENCH 1 11053 11053
7 SPA/COVER INFLATION HOSE 1 11830 11830
8 SPA CONTROL INLET/OUTLET O-RING 2 11699 11699
9 SPA CONTROL AIR INLET O-RING 1 11687 11687
10 SPA DRAIN PLUG 1 13076 13076
11 SUCTION FITTING 2 11695 11695
12 FILTER CARTRIDGE HOUSING 2 11798 11798
13 FILTER CARTRIDGE 2 11692 11692
14 FILTER CARTRIDGE HOUSING LID 2 11797 11797
15 INLET/OUTLET PLUG 3 11739 11739
16 SPA TUB 1 10067 12841
17 SPA COVER 1 11841W 12107W
18
SPA COVER INFLATABLE BLADDER (PRE-INSTALLED IN SPA COVER)
1 11689 12108
19 GROUND CLOTH 1 11717 12109
20 CHEMICAL DISPENSER 1 12735 12735
21 TEST STRIPS 1 11855 11855
22 WRENCH 1 11742 11742
23 AIR PRESSURE RELEASE VALVE CORE 1 12589D 12589D
24 HOSE ADAPTOR (PRE -INSTALLED WITH #7) 1 12773 12773
25 MALE BUCKLE 6 11994 11994
26 FEMALE BUCKLE 6 11993 11993
27 DEFLATION OUTLET CAP 1 12775D 12775D
28 DEFLATION HOSE ADAPTOR 1 12774 12774
29 SPA FILTER MOTOR 1 12777 12777
SPA SUCTION FITTING
Self-contained spa fi ttings. – For multiple outlet use only. – Wall mounting only.
Replace suction fi ttings within 3 installed year. – Tool required: screwdriver.
Spa suction fi tting maximum fl ow rate: 8.5 gpm (510 gph)
• Check suction strainer fi tting and fasteners for damage or tampering before each use of the spa.
• For service and winterization instructions refer to “Maintenance” and “Storage” sections.
• Read and follow all instructions, save these instructions for future reference.
To Next Page
Loading...
