T
Tracy WilliamsAug 16, 2025
What to do if the Intex Ultra Rondo XTR Swimming Pool filter motor fails to start?
- RRichard CabreraAug 17, 2025
If the Intex Swimming Pool filter motor won't start, ensure it's properly plugged into a 3-wire outlet protected by a Class A Ground Fault Circuit Interrupter (GFCI) or RCD. Also, check if the GFCI/RCD circuit breaker has tripped and reset it. If it repeatedly trips, there may be an electrical defect requiring an electrician. If the motor is too hot, let it cool down before restarting.