To Next PageTo Next Page
Need help?Do you have a question about the Intracom ULTRALiNK-FX80 and is the answer not in the manual?
Details the manual's scope, audience, and formatting conventions.
General safety rules and specific precautions for working on building roofs.
Details the components included in the radio unit package.
Specifies the order code and lists items included in the flat antenna package.
Lists available parabolic antennas with their specifications.
Overview of power injector models and their specifications.
Details the grounding kit and available grounding cable types.
Information on installing lightning surge protectors.
Overview of bulk cables, accessories, and kits for data traffic.
Details specifications for various fiber optic cables.
Information on optical SFPs and associated glands.
Details on mounting brackets, steel hose clamps, and cable ties.
Information on alignment tools, RSSI cables, and scope kits.
Details the receptacles on the UL-FX80 connection panel.
Describes the receptacles on the outdoor DC PonE injector.
Describes the receptacles on the outdoor AC PonE injector.
Describes the receptacles on the indoor AC PoE injector.
Lists tools required for installation and cable termination.
Details tools specifically for Ethernet cable termination.
Details tools required for grounding cable termination.
Outlines requirements and considerations for the site survey.
Details premises preparation, cable conduits, and grounding system needs.
Specifies requirements for wall mounting power injectors.
Details requirements for pole construction and antenna mounting.
Covers lightning protection and circuit breaker characteristics.
Introduces cable types and powering options for the device.
Specifies maximum allowed lengths for data and power cables.
Schematic showing cabling for direct AC or DC powering.
Schematic showing cabling via an outdoor DC PonE injector.
Schematic showing cabling via an outdoor AC PonE injector.
Schematic showing cabling via an indoor AC PonE injector.
Provides an overview of the installation and cabling procedure for flat antennas.
Lists necessary tools and materials for installing the grounding cable.
Step-by-step instructions for installing the grounding cable.
Details mechanical adjustment range and space requirements for antenna alignment.
Lists tools and materials for mounting kit installation.
Step-by-step guide for assembling the mounting brackets.
Instructions for final tightening of mounting kit screws.
Lists tools and materials required to mount the antenna onto the kit.
Details the initial steps for attaching the antenna to the mounting kit.
Instructions for securing the antenna using the safety screw.
Lists the topics covered in the cable installation section.
Procedure for preparing and connecting S-FTP Ethernet cables.
Procedure for installing electrical SFPs and connecting cables.
Important precautions for power cable termination.
Lists topics related to power injector installation.
Procedure for attaching brackets and installing hose clamps.
Steps for mounting the PonE device and removing its cover.
Procedure for connecting Ethernet cables using the clamp.
Instructions on how to secure Ethernet cables with a clamp.
Procedure for terminating and securing the grounding cable.
Steps for connecting the power supply cable to the device.
Detailed steps for wall mounting the PonE device.
Procedure for cabling the PoE injector.
Lists tools and materials required for Ethernet cable termination.
Details the preparation steps for Ethernet cable termination.
Procedure for preparing wires and inserting them into the guide.
Procedure for inserting the wire guide into the connector.
Steps for terminating wires onto the RJ-45 jack.
Using pliers to form shield contact with the terminal.
Trimming excess wire and performing continuity test.
Lists tools and materials for power supply cable termination.
Procedure for stripping cable sheath and assembling the connector.
Lists topics related to grounding cable termination.
Procedure for preparing the grounding cable for radio units.
Procedure for preparing the grounding cable for DC PonE devices.
Provides an overview of accessories for mounting kit alignment.
Steps for installing the azimuth and elevation alignment tools.
Overview of the procedure for changing flat antenna polarization.
Step-by-step instructions for removing the flat antenna.
Guide on selecting polarization based on antenna label markings.
Procedure for mounting and aligning the adaptation plate.
Ensuring correct polarization and final checks.
Instructions for adjusting the radio unit polarizer.
Steps to verify polarization and mount the antenna onto the unit.
Pinout details for UltraLink FX80 GbE receptacles.
Information regarding the SFP cage interface.
Pinout and signal description for PonE GbE IN receptacle.
Pinout and signal description for PonE GbE OUT receptacle.
Pinout and signal description for PonE INPUT receptacle.
General| Fax Support | T.38, G.711 pass-through |
|---|---|
| Data Rate | 10/100 Mbps |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Protocols | SIP |
| Voice Codecs | G.711, G.723.1, G.729A/B |
| Management | Telnet, SNMP |
| Power Supply | 12V DC |
