Need help?Do you have a question about the Intracom WiBAS G5 Connect+ and is the answer not in the manual?
Defines the scope and content of the manual for installing wireless terminal stations.
Presents an overview of various WiBAS terminal station radio units and antenna options.
Provides a compatibility chart for WiBAS radio units and available antennas.
Covers RF exposure limits, regulations, and general safety practices for equipment installation.
Information on compliance with ISED RSS-102, FCC, and EMF Exposure Directive regarding radiation.
Details general safety practices, including handling, grounding, ESD, and hot surfaces.
Lists radio units, antennas, mounting kits, cables, and other installation materials.
Details various AC and DC power injectors required for powering WiBAS terminal stations.
Outlines prerequisites for installing wireless equipment, including site surveys and planning.
Details the connection points for WiBAS G5 Connect+, WiBAS-Connect, and WiBAS OSDR-TS radio units.
Describes cabling connections for WiBAS terminal stations, including power injectors.
Details site survey, network planning, and site-specific requirements for installation.
Lists and describes tools recommended for installation, cable termination, and specific works.
Step-by-step guides for installing different WiBAS terminal station models and their antennas.
General| IP Rating | IP67 |
|---|---|
| Frequency Band | 5 GHz |
| Channel Bandwidth | 20 / 40 MHz |
| Modulation Schemes | QPSK, 16QAM, 64QAM, 256QAM |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Security | WPA2 |
To Next Page
