Invacare 7714P - Storing the Floor Base

Part No 1013153 3 Floor Base and Fixed Trapeze
FIGURE 2 Attaching Trapeze to Floor Base/Bed End/Adjusting the Grab Bar
Storing the Floor Base
NOTE:Forthisprocedure,refertoFIGURE 3.
1. Removethetrapezefromthefloorbase.
2. Depressone(1)snapbuttononfloorlegassemblyand
liftUPontheʺAʺframeuntilthesnapbuttonclearsthe
topofthefloorlegassembly.
3. Rotateone(1)legofthefloorbaseassembly270°
clockwiseawayfromtheotherleg.
4. Rotatetheremaininglegofthefloorbaseassembly90°
clockwisetowardstheotherleg.
FIGURE 3 Storing the Floor Base
Wing
Nut
Top Rail
Upper Bed
Bracket
Lower Bed
Bracket
Socket
Tubular
Hook
(Facing
Down)
Floor
Base
Bottom Rail
Chain
Links
“S” Hook
Trapeze
Key
Tubular Hook
Wing
Nut
Clamp
Offset Bar
Floor Base
Bed End
INCORRECT
MOUNTING
Top Rail
Upper Bed
Bracket
Wing Nut
Lower Bed
Bracket
Wing Nut
Socket
Drive Shaft
Tubular Hook (Facing Up)
Bed Frame
Offset
Bar
Tubular
Hook
Grab Bar
CORRECT
MOUNTING
Snap
Button
Floor Base
Assembly
STEP 4
Floor Base
Assembly
STEP 3
“A” Frame