EasyManua.ls Logo

Invacare 7714P User Manual

Invacare 7714P
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Part No 1013153 1 Floor Base and Fixed Trapeze
For more information regarding Invacare products, parts, and services, please visit www.invacare.com
Floor Base and Fixed Trapeze
Model Nos. 7714P and G7740P
NOTE:CheckALL partsforshippingdamag e.Incaseofshippingdamage,DONOTuse.ContactDealer/Carrierforfurtherinstructions.
Safety Summary
ToensurethesafeandproperinstallationoftheFloorBaseand FixedTrapeze,theseinstructionsMUSTbefollowed:
WARNING
DO NOT install this equipment without first reading and understanding this instruction sheet. If
you are unable to understand the warnings, cautions and instructions, contact a healthcare
professional, dealer or technical personnel if applicable, before attempting to install this
equipment - otherwise, injury or damage may occur.
The Fixed Trapeze MUST ONLY be installed onto beds with metal framed headboards.
The Fixed Trapeze used in conjunction with a bed, can assist an individual weighing up to 250 lbs.
(114 kg.). The Fixed Trapeze is designed to provide support, increase stability and assist the user
when repositioning himself/herself in bed.
Use the trapeze as an assistive device only. The trapeze is not designed to support the total body
weight of an individual or to be used as an assist device when transferring into or out of a bed.
INSTALLATION WARNINGS
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching
component parts are secure.
DO NOT INSTALL OR ADJUST TRAPEZE OF AN OCCUPIED BED.
DO NOT attach swivel trapezes to the floor base. This may cause the floor base to tip over,
causing injury to the patient and/or assistants.
Floor Base MUST be positioned under the bed at the headboard position.
Ensure that the snap buttons fully protrude through the adjustment hole of the floor leg
assembly. This ensures that the Floor Base is properly installed and securely locked in position.
ACCESSORIES WARNING
Invacare products are specifically designed and manufactured for use in conjunction with
Invacare accessories. Accessories designed by other manufacturers have not been tested by
Invacare and are not recommended for use with Invacare products.
Assembling the Floor Base
NOTE:Forthisprocedure,refertoFIGURE 1onpage 2.
1. InstalltheʺAʺframeintothefloorbaseassemblywiththesnapbuttonsfacingtheshortlengthofthefloorbase.
2. DepressthesnapbuttonononelegoftheʺAʺframeandslideitintothefloorbaseassemblyuntilanaudible
ʺclickʺis
heard.
Assembly, Installation and Operating Instructions
SAVE THESE INSTRUCTIONS
Question and Answer IconNeed help?

Do you have a question about the Invacare 7714P and is the answer not in the manual?

Invacare 7714P Specifications

General IconGeneral
BrandInvacare
Model7714P
CategoryMobility Aid
LanguageEnglish

Summary

Safety Summary

Installation Warnings

Critical safety guidelines for equipment installation and adjustments to prevent injury or damage.

Accessories Warning

Guidelines regarding the use of approved accessories with Invacare products for safety and performance.

Assembling the Floor Base

Attaching Trapeze to Floor Base/Bed End

Adjusting the Grab Bar

Height

Instructions for positioning the grab bar using the lower chain links onto the 'S' hook.

Position

Steps to adjust the horizontal placement of the grab bar on the offset bar using the trapeze key.

Storing the Floor Base

Limited Warranty

Related product manuals