Invacare Auriga User Manual

48
10.1.1.3 Removing a front wheel (3-Wheel Version)
Requirements:
• 2 Spanners, 17 mm
• Tilt the scooter over on it's side.
• Remove the bolts that hold the wheel (1) using the two
spanners, then remove the wheel from the fork.
Re-assembly
Re-assembly is done in reverse order. Make sure that the wheel runs in the same direction it did
before it was removed.

Invacare Auriga Specifications

General

Brand	Invacare
Model	Auriga
Category	Scooter
Language	English