Invacare meteor - 5 Pushing the Scooter by Hand; Disengaging Motors

26
5 Pushing the scooter by hand
The motors of the scooter are equipped with automatic brakes, preventing the scooter from rolling
away out of control when the power supply is switched off. When pushing the scooter, the magnetic
brakes must be disengaged.
5.1 Disengaging Motors
Danger of the vehicle running away!
• When the motors are disengaged (for push operation whilst freewheeling), the
electromagnetic motor brakes are deactivated! When the vehicle is parked, the levers for
engaging and disengaging the motors must without fail be locked firmly into the "DRIVE"
position (electromagnetic motor brakes activated)!
The lever for engaging and disengaging the motor is
located on the right-hand side at the rear.
Disengaging the motor
• Make sure that the power supply is turned off
(keyswitch).
• Press the lever (1) forwards.
Engaging the motor
• Pull the lever to the rear.