To Next PageTo Next PageHow to fix squeaks and rattles in Invacare Torque 3 Wheelchair?
To address squeaks and rattles in your Invacare Wheelchair, start by inspecting for any loose stem nuts or bolts. Also, check the bearings for signs of wear. Additionally, examine the tires for uneven wear, and the frame and fork for any bending. Ensure all hardware is properly tightened.
What to do if there is looseness in Invacare Torque 3?
To resolve looseness in your Invacare Wheelchair, check for uneven tire wear. Inspect the frame and fork for any bending. Also, ensure that all hardware is properly tightened.
Why do the casters flutter on my Invacare Wheelchair?
If the casters on your Invacare Wheelchair are fluttering, check first for uneven tire wear, a bent fork or frame, or loose hardware. If your tires are pneumatic, make sure they have the correct and equal pressure.
What to do if Invacare Torque 3 has sluggish turn performance?
If your Invacare Wheelchair's turning or overall performance feels sluggish, check the tires for uneven wear. Also inspect the fork or frame for bending, and make sure all hardware is tightened properly.
How to stop Invacare Torque 3 from veering left or right?
If your Invacare Wheelchair veers to the left or right, check for loose stem nuts and bolts. Also, inspect the bearings or signs of wear.
General| Folding | Yes |
|---|---|
| Weight Capacity | 300 lbs |
| Seat Depth | 16 inches |
| Wheel Size | 24 inches |
| Front Caster Size | 8 inches |
| Armrests | Desk Length, Full Length |
| Legrests | Swing-away |
| Seat Width | 16, 18, 20 inches |
Details warranty coverage periods for base frame, motors, electronics, etc.
Provides DANGER and WARNING statements about improper use, repair, and operation.
Warns about improper transfer techniques and transport systems.
Provides overall dimensions, weight limits, and battery requirements.
Instructions for turning the wheelchair power On/Off and using controls.
Details joystick functions, battery status, and charging procedures.
Instructions for engaging/disengaging motor lock levers and wheel locks.
