44
Note: The elevating legrests are fitted in pairs to the
wheelchair. When adjusting or removing, remember
that there is one elevating legrest for the right hand
side and another for the left hand side.
Footplate Assemblies
Independent footplates for footrest supports
(Photograph 19)
The footplate assemblies comprise of an adjustment tube and footplate and
are intended solely as a foot support when you are sitting in the wheelchair
and should not be used for standing. The position of your feet can be retained
by either heel loops or a calf strap. Each footplate assembly can be adjusted in
height. The footplates can be pivoted to an upright position to aid front
transfers.
Adjusting the footrests on the supports: Release the nut (A), position the
footplate assembly at the required height in the footrest support tube, tighten
the nut to secure.
18
To Next Page
Loading...
