To Next PageTo Next PageWhat to do if battery indicator flashes low on Invacare Pronto M41 after charging?
If the battery indicator on your Invacare Wheelchair flashes low immediately after recharging, it's likely due to weak batteries, a charger malfunction, or an electrical malfunction. Consider replacing the batteries or the charger. For electrical malfunctions, contact Dealer/Invacare.
What to do if charger shows low charge after charging Invacare Pronto M41 Wheelchair?
If the charger indicator shows a low charge level immediately after charging your Invacare Wheelchair, the batteries may be weak and unable to hold a charge, or there could be an electrical or charger malfunction. Try replacing the batteries or the charger. For electrical malfunctions, contact Dealer/Invacare.
What to do if my Invacare Pronto M41 will not drive?
If your Invacare Wheelchair won't drive, make sure the motor release levers are engaged and that the batteries are adequately charged. Ensure the charger is unplugged from the wall outlet before operation. Also, check the circuit breaker and reset it if necessary. If the breaker trips again, it could indicate an internal issue, and you should contact your Dealer/Invacare.
Why is the driving distance limited on my Invacare Pronto M41?
If you're experiencing limited driving distance with your Invacare Wheelchair, it could be due to the batteries not being charged long enough or being too weak to hold a charge. To resolve this, charge the batteries overnight, ensuring at least 8 hours of charge time between uses. Also, verify the charger is set correctly. If the issue persists, you may need to replace the batteries.
Why are the batteries not charging on my Invacare Pronto M41 Wheelchair?
If your Invacare Wheelchair batteries aren't charging, the charger might not be working, battery connections could be loose, there might be no current at the wall outlet, or there could be a bad connection on the charger, cable, plug, or internal wiring. Check all connections and secure any loose ones. Try a different wall outlet. If these steps don't work, the charger might need replacing, or internal repairs may be necessary; in such cases, contact Dealer/Invacare.
Why is the joystick erratic on my Invacare Wheelchair?
If the joystick on your Invacare Wheelchair is erratic or not responding as desired, it could be due to an electrical malfunction or the controller being programmed improperly. Contact Dealer/Invacare for service. You may need to reprogram the controller, referring to the electronics manual supplied with the wheelchair.
Why do Invacare Wheelchair batteries draw excessive current when charging?
If the batteries in your Invacare Wheelchair draw excessive current when charging, it's likely due to battery failure. Have the batteries checked for a shorted cell and replace them if necessary.
Why does only one drive wheel turn on my Invacare Pronto M41?
If only one drive wheel turns on your Invacare Wheelchair, it could be due to an electrical malfunction or one motor lock being disengaged. Contact Dealer/Invacare for service. Engage the motor lock.
Why does the motor chatter on my Invacare Pronto M41 Wheelchair?
If the motor in your Invacare Wheelchair “chatters” or runs irregularly, it is likely due to an electrical malfunction. Contact Dealer/Invacare.
Why does my Invacare Pronto M41 have limited driving distance?
If your Invacare Wheelchair has a limited driving distance, it could be that the batteries haven't been charged long enough or are too weak to hold a charge. Charge the batteries for at least 8 hours, ideally overnight, making sure the charger setting is correct. If this doesn't solve the issue, you may need to replace the batteries.
General| Brand | Invacare |
|---|---|
| Model | Pronto M41 |
| Category | Wheelchair |
| Language | English |
Explains the meaning of hazard and warning symbols used in the manual for safe operation and product integrity.
Outlines the wheelchair's classification and intended usage according to EN standards for user safety.
Provides essential safety instructions for using the mobility device to prevent injury and ensure safe operation.
Details safety precautions for driving, inclines, and freewheel mode to prevent accidents and tip-overs.
Guidance for new users on familiarizing themselves with the wheelchair's controls, functions, and driving modes.
Instructions and safety advice for navigating various obstacles using the SureStep system effectively.
Safety precautions and techniques for driving on slopes and inclines to maintain stability and control.
Procedures for adjusting armrests and the control panel for optimal user comfort, reach, and control.
Steps for adjusting the backrest angle and upholstery tension for proper user support and posture.
Information on the vehicle's overload protection and how the electronic system manages overheating and blockages.
Comprehensive guide on charging, handling, storage, and usage of the wheelchair batteries for longevity.
Guidelines for cleaning and disinfecting the wheelchair safely and effectively to maintain hygiene.
Regular inspection checks for the user to perform to ensure the wheelchair's safety and functionality.
Safety warnings and procedures for safely loading the wheelchair into a vehicle, including ramp usage.
Instructions and safety requirements for using the wheelchair as a vehicle seat during travel, adhering to ISO standards.
