6. Arm Pads
Check that the padding is in good condition X X
7. Seat and backrest upholstery
Check that it is in good condition X X
8. Rear Wheels
Wheel nut and sealed bearings correctly tightened X X X
No excessive lateral movement or binding when they are lifted from the
ground and turned, quick release axles correctly locked
X X
9. Handrims
Check for rough patches X X
10. Spokes
Inspect the spokes in case any are bent, broken or slack X X
11. Front Castors
Check the axle to ensure that it is correctly tightened, by turning the caster
The caster should stop gradually
X X
12. Fork / Fork tube
Check that all the fittings are in place X X
13. Pneumatic and solid tyres
If the wheelchair has pneumatic tyres, check that they are correctly inflated
(the pressure is shown on the sidewall)
X X
If the wheelchair has solid tyres, check the running surface X X