To Next PageTo Next Page
Need help?Do you have a question about the INVENTOR P2MVI-09 and is the answer not in the manual?
General| Type | Wall Mounted |
|---|---|
| Cooling Capacity | 9000 BTU/h |
| Energy Class Cooling | A++ |
| Energy Class Heating | A+ |
| SEER | 6.1 |
| SCOP | 4.0 |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 8.5 kg |
| Weight (Outdoor Unit) | 25 kg |
| Noise Level | 50 dB |
| Heating Capacity | 9500 BTU/h |
Important safety information for European users and proper disposal procedures for the appliance.
Explains the meaning and proper use of warning and caution symbols found throughout the manual.
Details and illustrates the components of both the indoor and outdoor units, including indicator lamps.
Explains advanced features like Refrigerant Leakage Detection, Louver Angle Memory, SELF CLEAN, CLEAN AIR, and Anti-mildew.
Specifies the recommended room and outdoor temperatures for cooling, heating, and drying operations.
Details how to operate the unit manually via a switch when the remote controller is unavailable.
Instructions on how to adjust the horizontal and vertical airflow direction for optimal comfort.
Explains the working principles of AUTO, SLEEP, Cooling, Heating, and DRYING operations.
Outlines essential steps before cleaning, including turning off the system and disconnecting power.
Provides instructions on how to clean the indoor unit using soft cloths and avoiding harsh chemicals.
Details the process of cleaning and maintaining the air filters and air freshening filter for efficient operation.
Step-by-step guide on how to replace the air filter and air freshening filter when needed.
Instructions on how to prepare the unit for long periods of inactivity, including cleaning and power disconnection.
Lists checks to perform before resuming operation after a period of inactivity.
Describes expected sounds and visual phenomena during normal operation, such as compressor protection or white mist.
Provides a guide to common malfunctions, their causes, and recommended solutions, including error codes.
