English • 35
cleaning & maintenance
8
To keep your blood pressure monitor in the best condition and protect the unit from damage, follow the directions listed below:
• Keep the monitor in the storage case when not in use.
• Do not fold the cuff to tightly.
• Clean the monitor and cuff with a soft dry cloth.
• Do not use any abrasive or volatile cleaners.
CAUTION
• Never immerse the appliance in water or any other liquid to protect against electrical hazards and damage.
• Do not subject the monitor to extreme hot or cold temperatures, humidity or direct sunlight.
• Store the device and the components in a clean, safe location.
• Do not subject the monitor to strong shocks, such as dropping the unit on the floor.
• Remove the batteries if the unit will not be used for three months or longer. Always replace all the batteries with new ones at the same
time.
tips for measurement
7
Measurements may be inaccurate if taken in the following circumstances.
• Results can be inaccurate when measuring within 1 hour after dinner or drinking.
• Results can be inaccurate when measuring immediate after drinking tea or coffee or after smoking.
• Results can be inaccurate when measuring within 20 minutes after taking a bath.
• Results can be inaccurate when measuring when talking or moving your fingers.
• Results can be inaccurate when measuring in a very cold environment.
• Results can be inaccurate when measuring when you want to discharge urine.
SET
M
EM
O
N
/
OF
F
H
/M
M
/
D
MEM.
To Next Page
Loading...
