English • 39
E2E4: there was shaking while
measuring
Hand or body shaking while measuring. Keep static and correct gesture and measure again.
The systolic pressure value or diastolic
pressure value is too high.
1. The cuff was held lower than your
heart.
Keep correct position and gesture and measure
again.
2. The cuff was not attached properly.
3. You moved your body or spoke
during measurement.
The systolic pressure value or diastolic
pressure value is too low.
1. The cuff was held higher than your
heart.
2. You moved your body or spoke
during measurement.
EMC statement
12
a. A statement to the effect that this equipment needs to be installed and put into service in accordance with the information provided in
the user manual; and
b. A statement to the effect that wireless communications equipment such as wireless home network devices, mobile phones, cordless
telephones and their base stations, walkie-talkies can affect this equipment and should be kept at least at a distance d=3,3 m away from
the equipment. The distance d is calculated by the manufacturer from the 800 MHz to 2,5 GHz column of Table 5 or Table 6 of IEC 60601-
1-2: 2007, as appropriate
.
To Next Page
Loading...
