Physical injury
CAUTION! Moving Parts. Moving parts can crush, pinch and cut. Keep hands clear of moving
parts while operating the instrument. Disconnect power before servicing.
LED (Light-Emitting Diode)
CAUTION! LED (light-emitting diode) HAZARD. Removing the protective covers and (when
applicable) defeating the interlock(s) may result in exposure to the internal LED. LEDs can burn the
retina, causing permanent blind spots. To ensure safe LED operation:
·
Never look directly into the light beam.
·
Wear proper eye protection and post a warning sign at the entrance to the laboratory if the LED
protection is defeated for servicing
·
Remove jewelry and other items that can reflect a light beam into your eyes or those of others
·
Do not remove safety labels, instrument protective panels, or defeat safety interlocks.
·
The system must be installed and maintained by a Thermo Fisher Scientific Technical
Representative.
AppendixBSafety
Instrument safety
B
56
iBright
™
Imaging Systems User Guide
To Next Page
