Invotone DVA2000 - Part 4: Bluetooth-Connection with Mobile Devices

To Next Page

To Previous Page

DVA2000

11. Volume Control LEVEL CH 2

12. Switch LINE/MIC - - for adjusting the input level: LINE = for audio devices with line output

(e.g. CD player or instrument), MIC = for Microphones.

13. Volume Control LEVEL CH 1

14. Mono-In CH 2 - The sound sources can be connected to microphones and line-level audio

devices (e.g. smartphone, MP3 player, mixer).

15. Mono-In CH 1 - The sound sources can be connected to microphones and line-level audio

devices (e.g. smartphone, MP3 player, mixer).

16. Stereo-In – Unbalanced stereo line input with cinch jacks for connecting a player (such as a CD

player, keyboard). The two inputs no. 9 and 10 can be used simultaneously if necessary, the volume

ratio must be set on the players.

17. Output Switch - For selecting the output signal to be conducted to the output socket (6).

[IMPUT1]: Supplies only the direct output of CH1. The signal from CH2 is not output. [MIX]: Outputs

mixed signals of CH1 and CH2.

Part 4: Bluetooth-connection with mobile devices:

The device has a Bluetooth receiver that allows music to be played wirelessly from mobile

devices such as smartphones, tablets and laptops.

1. After switching on, activate the Bluetooth function by pressing the MENU button twice

(item 3 – USB / SD player, BLUETOOTH®: „connecting…“

2. Activate the Bluetooth function on the Bluetooth source and start the search. Select "RTL-

29JH02" from the list and connect the devices.

NOTE: The first pairing may take 60+ seconds.

3. After pairing, start playing the music at the Bluetooth source as usual.