INVT GD200A-018G/022P-4 User Manual

GD200A series VFD Function parameters
-72-
Function
code
Name
Description
Default
value
Modify
13: Input side phase loss (SPI)
14: Output side phase loss (SPO)
15: Overheat of the rectifier module (OH1)
16: Overheat fault of the inverter module (OH2)
17: External fault (EF)
18: 485 communication fault (CE)
19: Current detection fault (ItE)
20: Motor autotune fault (tE)
21: EEPROM operation fault (EEP)
22: PID response offline fault (PIDE)
23: Braking unit fault (bCE)
24: Running time arrival (END)
25: Electrical overload (OL3)
26: Panel communication fault (PCE)
27: Parameter uploading fault (UPE)
28: Parameter downloading fault (DNE)
32: Grounding short circuit fault 1 (ETH1)
33: Grounding short circuit fault 2 (ETH2)
36: Undervoltage fault (LL)
P07.33
Running frequency at present fault
0.00Hz
●
P07.34
Ramp reference frequency at present fault
0.00Hz
●
P07.35
Output voltage at the present fault
0V
●
P07.36
Output current at present fault
0.0A
●
P07.37
Bus voltage at present fault
0.0V
●
P07.38
The max. temperature at present fault
0.0°C
●
P07.39
Input terminals state at present fault
0
●
P07.40
Output terminals state at present fault
0
●
P07.41
Running frequency at the last fault
0.00Hz
●
P07.42
Ramp reference frequency at the last fault
0.00Hz
●
P07.43
Output voltage at the last fault
0V
●
P07.44
The output current at the last fault
0.0A
●
P07.45
Bus voltage at the last fault
0.0V
●
P07.46
The max. temperature at the last fault
0.0°C
●
P07.47
Input terminals state at the last fault
0
●
P07.48
Output terminals state at the last fault
0
●
P07.49
Running frequency at the last but one fault
0.00Hz
●
P07.50
Output voltage at the last but one faults
0.00Hz
●
P07.51
Output current at the last but one faults
0V
●
P07.52
Output current at the last but one fault
0.0A
●

INVT GD200A-018G/022P-4 Specifications

General

Brand	INVT
Model	GD200A-018G/022P-4
Category	DC Drives
Language	English