Need help?Do you have a question about the INVT GD200A-1R5G-4 and is the answer not in the manual?
Provides essential safety rules for VFD operation, installation, and maintenance.
Guidelines for safe handling, installation environment, and connection during delivery.
Safety precautions for VFD startup, operation, and potential hazards.
Safety rules for VFD maintenance, inspection, and part replacement.
Specifies environmental conditions for VFD installation, including temperature and humidity.
Checks after installation to verify correct wiring, grounding, and clearance.
Steps for initial VFD setup, motor autotuning, and basic operation.
Details technical specifications for input, output, control features, and running controls.
Provides detailed rated specifications for constant and variable torque applications.
Guidance on protecting the VFD and input power cable from short circuits.
Step-by-step guide on how to change VFD function codes via the keypad.
Procedure for setting or disabling the VFD's password protection feature.
Guidance on setting motor parameters and performing autotuning for optimal performance.
Describes VFD start/stop logic, including restarting after power loss or faults.
Parameters and methods for setting up the VFD's PID control loop.
Step-by-step guide for tuning PID parameters (P, Ti, Td) for stability.
Guidance on identifying causes and solutions for common VFD faults.
Flowcharts for diagnosing common VFD issues like motor not working or vibration.
Troubleshooting steps when the motor fails to rotate or operate correctly.
Diagnosing and resolving issues related to motor vibration or abnormal noise.
Troubleshooting steps for VFD overvoltage faults.
Troubleshooting steps for VFD undervoltage faults.
Diagnosing and resolving issues causing abnormal motor heating.
Troubleshooting steps for VFD overheating issues.
Diagnosing and resolving motor stalling during VFD acceleration.
Troubleshooting steps for VFD overcurrent faults.
Methods to identify and mitigate VFD system interference issues.
Routine maintenance checks and hardware diagnostics for the VFD.
Lists VFD fault response codes and their meanings during communication.
Selection criteria for breakers, contactors, and leakage protection switches.
Information on selecting and installing braking resistors or units.
Guidance on selecting appropriate braking resistors or units based on VFD model.
To Next Page
General