Rated Parameters Setting
Rack Online 1-3k UPS User Manual 33
8) Press ON/OFF to choose protocol and display current setting.
VAC
INPUT
OUTPUT
LOAD
MODE
CONVERTER
BYPASS
Hz
Current voltage Current frequency
Current mode
Current protocol
9) Press ON/OFF to save current setting and exit. If want to change, press FUNC and repeat
the procedures above.
10) If you want to exit from setting mode and give up saving, press ON/OFF and FUNC
together for 2.5 seconds when in setting mode.
11) Restart and check if the setting is right.
To Next Page
Loading...
Need help?
General
