INVT HT1106L

Important Safety Instructions
True Online 6-20k UPS User Manual
1
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important safety instructions. Read all safety and operating
instructions before operating the uninterruptible power systems (UPS). Adhere to all
warnings on the unit and in this manual. Follow all operating and user instructions. This
equipment can be operated by individuals without previous training.
This product is designed for commercial/industrial use only. It is intended for use with lift
support and other designated “critical” devices. Maximum load must not exceed that shown
on the UPS rating label. The UPS is designed for data processing equipment. If uncertain,
consult your dealer or local representative.
This UPS is designed for use on a properly grounded (earthed), 220/230/240VAC, 50 or
60Hz supply. The factory default setting is 220VAC/50Hz. Installation instructions and
warning notices are in this manual.
The UPS 06-20@220/230/240VAC is designed for use with a three-wire input (L,N,G).
WARNING
THE BATTERY CAN PRESENT A RISK OF ELECTRICAL SHOCK AND
HIGH SHORT CIRCUIT CURRENT. FOLLOWING PRECAUTIONS
SHOULD BE OBSERVED BEFORE REPLACING THE BATTERY.
z Wear rubber gloves and boots.
z Remove rings, watches and other metal objects.
z Use tools with insulated handles.
z Do not lay tools or other metal objects on the batteries.
z If the battery is damaged in any way or shows signs of leakage, contact your local
representative immediately.
z Do not dispose of batteries in a fire. The batteries may explode.
z Handle, transport and recycle batteries in accordance with local representative.
WARNING
ALTHOUGH THE UPS HAS BEEN DESIGNED AND MANUFACTURED
TO ENSURE PERSONAL SAFETY, IMPROPER USE CAN RESULT IN

INVT HT1106L Specifications

General

Brand	INVT
Model	HT1106L
Category	UPS
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Warnings

Provides essential safety and operating instructions before using the UPS, covering general warnings.

Battery Safety Precautions

Details the risks of electrical shock and high short circuit current associated with battery handling.

Operational Safety Precautions

Covers safe practices for cleaning, ventilation, and managing the UPS power cord.

SYSTEM DESCRIPTION

PRODUCT SPECIFICATION AND PERFORMANCE

UPS Model Identification

Lists the available UPS models, including standard and long backup time variants.

Key Performance Specifications

INSTALLATION

Unpacking and Inspection Procedures

Guidance on unpacking the UPS, checking contents, and inspecting for transport damage.

InputOutput Power Connection

Instructions for connecting input/output power, including installation environment and wiring requirements.

External Battery Pack Connection

Parallel UPS System Installation

CONTROLS AND INDICATORS

Front Panel Control Buttons

Status Indicator Lights

OPERATION

UPS Start-up and Shutdown Procedures

Instructions for turning the UPS on and off in normal and battery power modes.

Parallel UPS System Operation

Maintenance Bypass Mode Activation

BATTERY MAINTENANCE

Routine Battery Care and Longevity

NOTES FOR BATTERY DISPOSAL AND REPLACEMENT PROCEDURES

TROUBLE SHOOTING

Checking UPS Status and Alarms

Guidance on monitoring UPS status, identifying faults, and responding to operational alarms.

S-Code Fault Resolution Guide

Explanation of S-codes and troubleshooting steps for diagnosing and resolving various UPS faults.