INVT VCP Series

Appendix 1 Wiring diagram of VCP series conventional outdoor unit
22 Shenzhen INVT Network Technology Co., Ltd.
Appendix III Harmful substances in products and content table
Part Name
Harmful materials
Pb
Hg
Cd
Cr（VI）
PBB
PBDE
Cabinet
×
○
○
○
○
○
Cooling
accessories
×
○
○
○
○
○
Fan units
×
○
×
○
○
○
Heating
unit
×
○
○
○
○
○
Electronic
control unit
×
○
×
○
○
○
Display
screen
×
×
○
○
○
○
Made into
board
×
○
○
○
○
○
Heat
Exchanger
×
○
○
○
○
○
Copper
tube
×
○
○
○
○
○
Cable
×
○
○
○
○
○
This form is compiled in accordance with the provisions of SJ/T 11364.
O：Indicates that the content of the toxic and hazardous substance in all homogeneous materials of the part is below
the limit requirement specified in GB/T 26572;
X： Indicates that the content of the toxic and hazardous substance in at least one of the homogeneous materials of
the part exceeds the limit requirement of GB/T 26572.
The following components or applications containing toxic and hazardous substances are limited to the current
technical level and cannot be reliably replaced or there is no mature solution:
1．The reasons for the lead content in the above components: the copper alloy of the parts contains lead; the high
temperature solder contains lead; the high temperature solder in the diode contains lead; the resistance body glass
uranium contains lead (exempt); the electronic ceramic contains lead (exempt);
2．The backlight tube contains mercury;
3．The switch contacts of the power distribution section contain cadmium and its compounds.
Note on the environmental protection use period: The environmental protection use period of this product (marked
on the product body) refers to under normal use conditions and compliance with safety precautions of this product, from
the date of production, the toxic and hazardous substances or elements contained in this product (except batteries) will
not have a serious impact on the environment, people, and property.
Scope of application: VCP series outdoor unit