Chapter 1. Product Overview
2 Shenzhen INVT Network Technology Co., Ltd.
Table 1-1 Model List
1.3 Product Composition
The outdoor unit consists of heat exchanger, axial flow fan, fan inverter, pressure sensor, etc.
The appearance and location of outdoor unit components are shown in Figure 1-2~Figure 1-3.
Where 1 - axial fan; 2 - electric control box; 3 - heat exchanger; 4 - pressure sensor. If the outdoor
ambient temperature is lower than -15℃, it is necessary to use with the low-temperature
component, and the appearance of the low-temperature component is shown in Figure 1-4.
Figure 1-2 Outdoor unit single system schematic (single fan)
To Next Page
Loading...