IOGear GCS1102 - Firmware Upgrade; Firmware Upgrade Procedure

23
Step 1
Please follow through the installation process from
the Installation section.
Step 2
Switch ALL focus to the port that you will be using
toperformthermwareupgrade.(Pleasereferto
Port Switching Section). Then, go to www.iogear.
comtodownloadthelatestavailablermwareor
thespecicrmwarethatyouwishtouse.
Firmware Upgrade
Step 3
Shut down all the other computers that are
connected to the KVM. Then Invoke Firmware
Upgrade Mode. (Please refer to Hotkeys Setting
Mode section)
Step 4
Disconnect your keyboard and mouse from the
console keyboard and mouse port, then connect
them to the USB peripheral sharing ports.