[Num Lock] + [-]
or
[Ctrl] + [F12]
[R] [Enter] This administrator only hotkey restores the switch’s default
values. See Restore Default Values.
[SN][PN] [Enter] Switches access to the computer that corresponds to that
port ID.
[T] Toggles the OSD Hotkey between [Ctrl] [Ctrl] and [Scroll
Lock] [Scroll Lock].
[]
Invokes Skip mode and skips from the current port to the
rst accessible port previous to it.
[]
Invokes Skip mode and skips from the current port to the
next accessible port.
62
To Next Page
Loading...
