20
Keyboard Emulation
Console keyboard port emulation/bypass feature supports most gaming/multimedia
keyboards. The default setting is enabled. To disable:
1. Invoke HSM
2. Press [N]
This procedure is a toggle. Repeat Step 1 and 2 to enable Keyboard Emulation
Note: When keyboard emulation is disabled, the [M], [W], [F2], [F3], [F4], [F5], [F6], and
[F10] are also disabled
SPC Mode
To set the keyboard/mouse to use SPC mode so that it can work under special operating
systems as a standard (104 key) keyboard/mouse:
1. Invoke HSM
2. Press [F1]
Hotkey Settings Mode Summary Table
Key Function
[H] Toggles between the default combination([Num Lock] [-]) and alternate
combination ([Ctrl][F12]).
[T] Toggles between the default combination ([Scroll Lock] [Scroll Lock]) and
alternate combination ([Ctrl][Ctrl]).
[F2] Enables Mac keyboard emulation.
[F10] Automatically detects and sets the keyboard operating platform.
[F4] Lists current switch settings via Paste function of a text editor.
[F5] Performs a reset on all USB devices.
[F6][nn][Enter] Sets the keyboard language
Note: nn is a two-digit number that represents one of the following
keyboard language code:
US English:33
French:08
Japanese:15
[B] Enables/Disables the buzzer.
[X][Enter] Enables/Disables the port switching keys.
[u][p][g][r][a][d][e] Invokes Firmware Upgrade Mode.
[E] Enables/Disables Power ON Detection feature.
[S] Toggles between the default and alternate manual port selection
pushbutton settings.
[N] Enables/Disables keyboard emulation.
[M] Enables/Disables mouse emulation.
[W] Enables/Disables mouse port-switching.
To Next Page
