What to do if IOGear GW3DHDKIT shows no input from selected source?
If your IOGear Receiver displays 'No input from selected source', ensure the device is powered on and securely connected to the correct input port.
Why IOGear Receiver video format is not recognized?
If your IOGear Receiver displays 'Video format not recognized', it means that the video frame rate or resolution is not supported. Adjust the related settings or connect the source directly to the TV for troubleshooting.
How to turn on IOGear Receiver from power saving mode?
To exit power saving mode on your IOGear Receiver, turn on the Transmitter or the receiver using either the unit itself or the remote control.
Why IOGear GW3DHDKIT Receiver transmitter is trying to establish the connection?
The IOGear Receiver transmitter may take up to 20 seconds to establish a connection with the receiver.
How to change IR 38KHz default setting on IOGear GW3DHDKIT?
To change the IR frequency on your IOGear Receiver, press the IR button on the remote control to cycle through the available frequencies: 38KHz, 40KHz, or 33KHz.
Details the front panel components of the transmitter and receiver units.
Details the ports and connectors found on the back of the transmitter and receiver.
Explains the buttons and their functions on the remote control.
Step-by-step instructions for connecting source devices to the transmitter.
Step-by-step instructions for connecting the receiver to a TV.
Guide to powering on the system and selecting media sources.
Details product model, serial number, and support contact points.
Describes the company's approach to innovative and stylish product design.
Highlights the company's commitment to environmental conservation and reducing e-waste.
General| Category | Receiver |
|---|---|
| Model | GW3DHDKIT |
| Maximum Resolution | 1080p |
| HDMI Ports | 1 |
| 3D Support | Yes |
| Power Supply | 5V DC |
| Type | Wireless HDMI Kit |
| Wireless Range | up to 30 feet |
| Latency | Less than 1ms |
To Next Page
