Need help?Do you have a question about the IOGear GWSSKIT and is the answer not in the manual?
General| Type | AV transmitter & receiver |
|---|---|
| Material | Plastic |
| Product color | Black |
| Integrated antenna | Yes |
| Maximum resolution | 1920 x 1080 pixels |
| Audio output channels | 2.0 channels |
| Maximum transfer distance | 15 m |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8, Windows 8.1 |
| Cables included | HDMI, Micro-USB |
| Number of HDMI outputs | 1 |
| Connectivity technology | Wired & Wireless |
| Output current | 1 A |
| Operating voltage | 5 V |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
Weight and Dimensions| Receiver dimensions (WxDxH) | 86 x 16 x 67 mm |
|---|---|
| Transmitter dimensions (WxDxH) | 60.3 x 9 x 25 mm |
Lists key features like Full HD playback and Miracast compatibility.
Details the necessary hardware and software for the Duplicast.
Specifies minimum PC hardware: CPU, RAM, and wireless networking.
Lists compatible operating systems for the Duplicast setup.
Outlines requirements for Android and Windows mobile devices.
Specifies display requirements, primarily an HDMI port.
Identifies the Power LED, HDMI Out, Mode Switch, and Power Port on the receiver.
Identifies the USB Type-A Connector for the optional transmitter.
Step-by-step guide to connect the receiver's HDMI port to the TV/projector.
Instructions for connecting the Micro USB power cable and adapter.
Explains the solid blue Power LED indicator upon successful power-up.
Directs Windows 7 or 8 users to skip to page 17 for specific instructions.
Shows the IOGEAR-xxx device name on the initial flash screen.
Guides on determining Wi-Fi Direct or USB adapter connection for Android.
Steps to access and activate Screen Mirroring or Smart View on Android.
Process of scanning for and connecting to the Duplicast receiver from Android.
Explains connection establishment, sync, and mirror image display.
How to disconnect the Android device from the Duplicast receiver.
Steps to check if the Windows 10 computer supports Wi-Fi Direct.
Instructions for using the USB adapter if Wi-Fi Direct is unavailable.
Clicking 'Connect to a wireless display' in Windows 10 settings.
Clicking the IOGEAR device name to start the screen mirroring connection.
Confirms content is cast to the big screen and shows disconnect option.
How to disconnect the Windows 10 computer from the Duplicast receiver.
Using the mode switch to set the receiver for Windows 7 operation.
Shows the expected screen output when connected to Windows 7.
Closing applications and inserting the installation CD for GWSSKIT.
Instructions for running the setup.exe and handling security warnings.
Locating and launching the IOGEAR application icon from the desktop.
Finding the receiver in the Device List and starting the cast from the app.
Connecting the computer to a Wi-Fi router for streaming online content.
Guide to installing the USB transmitter for improved wireless performance.
Steps to resolve issues if the USB transmitter fails to connect.
Details FCC rules and limits for Class B digital devices.
Provides information on the 1-year limited warranty and registration.
Contact details for product assistance and support from IOGEAR.
To Next Page
