8
Hardware Installation
STEP 1. Plug in the AC power cord and wait for the scene selection buttons
to go solid
STEP 2. Connect the HDMI video sources
STEP 3. Connect the microphone and/or audio source
STEP 4. (Optional) Connect an HDMI display to the SRC/PGM Output port
STEP 5. (Optional) Connect an HDMI display to the Loop Out port
STEP 6. Connect an Ethernet cable for internet access
STEP 7. Connect your iPad to the Link Port
Note: :For iPad with USB-C connector, simply connect the included USB-A to USB-C
cable to the GUV303 (this is a special cable).
Or use the included USB-A to USB-A cable along with an Apple Lightning USB 3
Adapter (not included) to connect to iPad devices with lightning connector.
To Next Page
Loading...
Need help?
General
