Iomega Peerless - You Want To Change the Drive Letter Assigned to Your lomega Peerless Drive System; Your System Does Not Recognize Multiple Partitions on your Peerless Drive System

disconnecting the interface cable or power cable from the interface module to prevent any data loss.
You Want To Change the Drive Letter Assigned to Your Iomega Peerless
Drive System.
NOTE:
Changing your drive letters may cause letters assigned to other devices to be reassigned. Some links
and dependencies may be broken. In addition, it may be necessary to reconfigure the software that came with
your Iomega Peerless drive system after following these step, since changing drive letters may break some
links within the software.
Drive letter assignments are controlled by the operating system—in order to change a drive letter assignment,
you must work with the procedures required by your computer's operating system.
Windows 98 and ME Users
To change the drive letter for a removable drive:
1. Right click the Peerless icon in
My Computer
or
Windows Explorer
.
2. Click
Properties
.
3. Click the
Iomega
tab.
4. A list of available drive letters displays (including network drives). Select the drive letter you want to
assign to each removable device attached to your system by selecting a new drive letter in the pull-
down menu box below the drive icon.
5. Click
OK
.
6. Restart your system for the changes to take effect.
Windows 2000 Users:
Drive letter assignments are controlled by the operating system. In order to change a
drive letter assignment, you must work with the procedures required by your computer's operating system.
The following instructions describe how to change drive letters for removable drives under Windows 2000.
NOTE:
You must have administrator privileges for your local computer in order to change drive letters under
Windows 2000.
1. Select
Control Panels
,
Administrator Tools
,
Computer Management
, then
Disk Management
.
2. Right click the icon for your Iomega drive and select
Change Drive Letter and Path
from the shortcut
menu.
3. Click the
Edit
button.
4. Click
Assign a drive letter
and select the letter you want to use for your Iomega drive.
Your System Does Not Recognize Multiple Partitions on your Peerless
Drive System.
The Iomega Peerless disk should not be partitioned. IomegaWare software does not support partitions on the
Peerless disk.