14
PC Installation
4
5
Connect the end of the data cable marked
"zip" to the Zip
®
connector on the back of your
drive.
(If the connector doesn’t seem to fit, try
turning it over.
Tighten all connector screws.)
Zip Connector
Connect the other end of the data cable to the
SCSI connection on your computer.
CAUTION Make sure you connect the Zip cable to a SCSI connector
and NOT to a parallel port (printer port). The parallel port is the same
size and shape as some SCSI adapter connectors, but the parallel port
will not support this model of the Zip drive. M
If your adapter has a 50-pin SCSI connector: Check the
opposite page for information on the cable or cable converter
needed for connecting your Zip drive.
To Next Page
Loading...
