15
PC Installation
6
OPTIONAL: You can connect your Zip
®
drive in
a SCSI chain. (You may need an additional SCSI
cable to connect another SCSI drive to the Zip drive.)
M IMPORTANT! When connecting the Zip drive with other SCSI
drives, check Connecting Your Zip Drive in a SCSI Chain on
pages 33-34 to make sure the SCSI ID and termination on your Zip
drive are set correctly. M
Cables and Converters for Different SCSI Connections
25 Pin D-Sub Connector
The SCSI Zip drive and the Zip Zoom SCSI card
use this connector. This connector works
directly with the Zip SCSI data cable or any
standard 25 pin SCSI cable. If you need an
extra Zip SCSI data cable, you can purchase it
by calling 1-800-MY-STUFF or contacting
www.iomega.com.
50 Pin High Density Connector
Iomega Jaz
®
drives and Jaz
®
Jet
®
SCSI adapters
use this connector. Use a 50 HD to 25 D-Sub
SCSI cable to connect your Zip drive to this
connector. You can purchase this cable by
calling 1-800-MY-STUFF or contacting the
Iomega web site at www.iomega.com.
50 Pin Centronix Connector
Some older SCSI adapter cards and drives use
this connector. To connect your Zip drive to
this connector, use a 25 D-Sub Female to 50
Centronix Male cable converter with a Zip
data cable. If you need this converter, call
1-800-MY-STUFF or contact www.iomega.com
and purchase a Zip 25-50 pin cable converter.
(See Caution on page 12.)
To Next Page
Loading...
