6
Mac Installation
PC Installation
4
5
Connect the end of the data cable marked
"zip" to the Zip
®
connector on the back of your
drive. (If the connector does not go on easily, try
turning it over.
Tighten all connector screws.)
Zip Connector
Connect the other end of the cable to the SCSI
connection on your Mac.
PowerBook Users: You need a special PowerBook cable
(which you may already have) or an HDI–SCSI adapter to connect
the Zip drive to a PowerBook. If you do not already have a
PowerBook SCSI cable, you can purchase a PowerBook adapter
by calling 1-800-MY-STUFF.
To Next Page
Loading...
