7
Mac Installation
6
OPTIONAL: You can connect your Zip
®
drive in
a SCSI chain. (You may need an additional SCSI
cable to connect another SCSI drive to the Zip drive.)
M IMPORTANT! When connecting the Zip drive with other SCSI
drives, check Connecting Your Zip Drive in a SCSI Chain on
pages 33-34 to make sure the SCSI ID and termination on your Zip
drive are set correctly. M
Cables and Converters for Different SCSI Connections
25 Pin D-Sub Connector
The SCSI Zip drive uses this connector. This
connector works directly with the Zip SCSI
data cable or any standard 25 pin SCSI cable.
If you need an extra Zip SCSI data cable, you
can purchase it by calling 1-800-MY-STUFF or
contacting www.iomega.com.
50 Pin High Density Connector
Iomega Jaz
®
drives and Jaz
®
Jet
®
SCSI adapters
use this connector. Use a 50 HD to 25 D-Sub
SCSI cable to connect your Zip drive to this
connector. You can purchase this cable by
calling 1-800-MY-STUFF or contacting the
Iomega web site at www.iomega.com.
50 Pin Centronix Connector
Some older SCSI drives use this connector.
To connect your Zip drive to this connector,
use a 25 D-Sub Female to 50 Centronix Male
cable converter with a Zip data cable. If you
need this converter, call 1-800-MY-STUFF or
contact www.iomega.com and purchase a
Zip 25-50 pin cable converter.
(See Caution on page 4.)
To Next Page
Loading...
