8
4. Do one of the following:
• Press the 1 Button to select G-1 Mode. In this mode, the
tempo automatically decreases or increases by 5 BPM every
4 measures, depending on your accuracy.
• Press the 2 Button to select G-2 Mode. In this mode, the
tempo automatically decreases or increases by 1 BPM each
measure. (The starting tempo is your metronome's current
setting.)
5. Hit the pads in time with the metronome. The six LEDs of the 1-5/Variation Buttons indicate
how accurate (how "on time") you are.
• When you are right on the beat, the 3
and 4 Button light up.
• When you are slightly off the beat, the 2
or 5 Button will light up.
• When you are off the beat, the 1 or
Variation Button will light up.
• When you are completely off the beat,
no buttons will light up.
6. Press the Start/Stop Button to stop.
Using Rhythm Change Up
Rhythm Change Up helps you practice changing rhythms while still maintaining accurate time.
To use Rhythm Change Up:
1. Press the Pattern Button and Tempo Button at the
same time, and then press the 3 Button.
2. Press the Start/Stop Button.
3. Press the 1, 2, or 3 Button, or use the – and + Buttons to select a rhythmic progression,
shown below:
P-1:
P-2:
P-3:
4. Press the Start/Stop Button to begin.
5. Hit the pads in the rhythm you selected (above) and in time with the metronome (the starting
tempo is your metronome's current setting). The six LEDs of the 1-5/Variation Buttons indicate
how accurate (how "on time") you are:
• When you are right on the beat, the 3 and 4 Button light up.
• When you are slightly off the beat, the 2
or 5 Button will light up.
• When you are off the beat, the 1 or
Variation Button will light up.
• When you are completely off the beat,
no buttons will light up.
The display will show your score:
• 0 – 29: OK
• 30 – 59: Good
• 60 – 79: Very Good
• 80 – 100: Excellent
1
2
SLOW
GOOD
FAST
12345
VARIATION
START
/STOP
123
To Next Page
Loading...
Need help?
General
