9
Using Follow Me
Follow Me helps you practice identifying different drums by their sound and memorizing drum
rhythms that use the entire drum kit. In this exercise, a drum loop will repeat, alternating between (1)
the drum pattern itself and (2) a metronome track of the same length during which you play the drum
pattern yourself.
To use Follow Me:
1. Press the Pattern Button and Tempo Button at the
same time, and then press the 4 Button.
2. Press the Start/Stop Button.
3. Use the – and + Buttons to select the drum pattern you want to play
to.
4. Press the Start/Stop Button to begin.
5. When you hear the drum pattern, try to learn
which pads are being played and when.
During the metronome track that follows,
play the same drum pattern in time with the
metronome. For reference, the display will
show the current beat. The six LEDs of the 1-
5/Variation Buttons indicate how accurate
you are.
6. Press the Start/Stop Button to stop.
Using Drum Mute
Drum Mute lets you silence certain parts of various drum patterns, allowing you to play freely and
create your own parts over the rest of the drum pattern.
To use Drum Mute:
1. Press the Pattern Button and Tempo Button at the
same time, and then press the 5 Button.
2. Press the Start/Stop Button.
3. Use the – and + Buttons to select the drum pattern you want to play
to.
4. Press one or several of the 1-5/Variation Buttons to select the sound
or sounds you want to mute:
• 1: Kick drum
• 2: Snare drum
• 3: Hi-hat
• 4: Toms
• 5: Crash and ride cymbals
• Variation: Percussion
5. Press the Start/Stop Button to begin.
6. Play freely along with the drum pattern you hear. The drum pattern will not include any sounds
you muted in Step 4, allowing you to create your own part.
7. Press the Start/Stop Button to stop.
Automatic Power-Off
To save energy, the drum module will power off automatically after 30 minutes of no activity. If you
do not need this feature, disable it by powering off the drum module, and then pressing and holding
the Start/Stop Button while powering it back on. PoF will appear on the display to confirm the
feature is off.
Note: After powering off, this feature will be re-enabled. Repeat the procedure above to disable it
each time you power on the module.
To Next Page
Loading...
Need help?
General
