Need help?Do you have a question about the iOptron SkyGuider and is the answer not in the manual?
General| Mount Type | Equatorial |
|---|---|
| Payload Capacity | 11 lbs (5 kg) |
| Tracking Modes | Sidereal, Solar, Lunar |
| Battery Life | Approx. 20 hours (with 8xAA batteries) |
| Mounting Base | 3/8" thread receiver |
| Latitude Adjustment Range | 0° to 65° |
Explains the purpose and basic principle of the equatorial mount for astrophotography.
Details the components included in the #3520 mount and #3500 package.
Identifies and defines key components of the SkyGuider mount assembly.
Guides on adjusting the mount's latitude setting for different geographical locations.
Instructions for attaching the mount to a tripod and initial positioning.
Details how to set the precise latitude for optimal polar alignment.
Explains the process of attaching the counterweight shaft and counterweight.
Describes how to balance the mount with attached equipment for smooth operation.
Provides instructions for aligning the mount with the celestial pole for accurate tracking.
Explains the benefit and application of the 0.5X tracking speed for specific photography.
Details the guiding port for autoguiding and its compatibility with other equipment.
Mentions the capability for mounting multiple cameras or scopes simultaneously.
Provides guidelines for general maintenance and care of the mount.
Information on how to contact iOptron for support and service inquiries.
Environmental guidelines for disposing of the electronic product responsibly.
Lists the detailed technical properties and dimensions of the mount.
To Next Page
