This device is designed to be equipped with a dedicated keyboard. Follow these steps to connect the keyboard to your tablet:
1. Place the dedicated keyboard on an even and stable surface (e.g. a desk);
2. Hold your tablet with two hands, align the connector and the two magnetic contacts on the keyboard to the jack and the positioning
slots at the bottom of the tablet;
3. As soon as the keyboard is connected to the tablet, it is ready for use;
4. You can rotate the tablet to overlap the keyboard, as you would do with a laptop.
Note:
1. This keyboard is a plug-and-play device; you can connect/disconnect it anytime;
2. Normally, the power LED on the keyboard will be turned on once the tablet is connected to the keyboard;
3. When the tablet overlaps on the keyboard, the display will be turned o. As soon as it is erect, the display will be turned on again;
4. Since the keyboard is powered by the tablet, it has no built-in battery inside.
Warning: The maximum angle between the tablet and the keyboard is 120 degrees. DO NOT rotate the tablet further than that angle
as it may cause damage to the tablet and keyboard.
CONNECTING THE KEYBOARD
11
To Next Page
Loading...
General