15/37
1. ：Get into the administration page
2. ：Video Snapshot
3. Show system time, video resolution, and video refreshing rate
4. Select video streaming source (When streaming 2 setting in『Video Setting』 is closed, this
function will not display)
5. IP Camera supports 2-way audio. Click the “Chatting” check box. Then you can
use microphone which connect to the PC to talk to server side, which is IP
Camera side.
6. Shows how many people connect to this IP camera
7. Relay out: On or Off
8. Pan Tilt control of this IP camera
9. Auto Pan：The camera will pan horizontally.
10. Patrol：The camera will move alone with the preset points.
11. Speed：The speed of the camera move.
12. Preset Point
13. Set up the name of the preset point
14. Add/ remove preset point
Double-click the video, it will change to full screen mode. Press “Esc” or double-click
the video again, it will change back to normal mode.
Right-Click the mouse on the video, it will show a pop-up menu.
1. Snapshot：Save a JPEG picture
2. Record Start：Record the video in the local PC. It will ask you where to save the
video. To stop recording, right-click the mouse again. Select “Record Stop”. The
video format is AVI. Use Microsoft Media Player to play the recorded file.
3. Mute：Turn of the audio. Click again to turn on it.
4. Full Screen：Full-screen mode.
To Next Page
Loading...
