IP Camera Pan-Tilt - Factory Default Reset; Package Contents List; Appendix: SD Card Recommendations

37/37
VIII. Factory Default
i、 To recover the default IP address and password, please follow the following
steps.
ii、 Remove power, and press and hold the button in the back of IP Camera.
iii、 Power on the camera. Don’t release the button during the system booting.
iv、 It will take around 30 seconds to boot the camera.
v、 Release the button when camera finishes proceed.
vi、 Re-login the camera using the default IP (http://192.168.1.200), and user
name (admin), password (admin).
IX. Package contents
i、 IP Camera Network Camera
ii、 Adaptor
iii、 Ethernet Cable
iv、 CD title (User manual, IP installation Utility)
Appendix I
SD Card Recommended：
SanDisk 128M
SanDisk 256M
SanDisk 512M
SanDisk 1G
SanDisk 2G
SanDisk 4G
Transcend 128M 80X
Transcend 256M 80X
Transcend 512M 80X
Transcend 1G 80X
Transcend 2G 80X
Transcend 4G 80X