EasyManua.ls Logo

IPC Eagle CT15 - Page 20

IPC Eagle CT15
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
20
No detergent is delivered
• the detergent button LED is off • press the detergent button
• detergent tank empty • fill the detergent tank
• the brush motor is off turn the motor on by
operating the brush lever
the hose delivering the
detergent to the brush is
blocked
• unblock and open the circuit
• the tap is dirty or faulty have the tap cleaned or
replaced
• the solenoid valve is faulty • replace the solenoid valve
•the filter is dirty (CT 30 ONLY) • clean the filter
The detergent flow does not
stop
• the solenoid valve is faulty • replace the solenoid valve
The suction motor does not
start
• the suction button LED is off • press the suction button.
There is no power to the suction
motor or the motor is faulty
check that the motor power
connector is correctly
connected to the main
wiring; if it is correctly
connected, have the motor
replaced
•[B]= MOSFET temperature >
150°C
•[B]= stop the machine, leave
to cool down for 45’
•[B]= excessive motor absorption
>30 A for 2 second
•[B]= stop the machine and
check the motor
The squeegee does not clean
or suction is ineffective
the edge of the rubber blades in
contact with the floor is worn
• replace the rubber blade
the squeegee or hose is
blocked or damaged
unblock and repair the
damage
• the float switch has tripped (dirty
water tank), is clogged by dirt or
broken
empty the dirty water tank or
reset the float switch
• the suction hose is blocked • unblock the hose
the suction hose is not
connected to the squeegee or is
damaged
• connect or repair the hose
there is no power to the suction
motor or the motor is faulty
see: "The suction motor
does not start"
The batteries do not provide
the normal work time (battery
models only)
the battery poles and charging
terminals are dirty and oxidised
clean and grease the poles
and terminals, charge the
batteries
• the electrolyte level is low top up all the elements with
distilled water as described in
the instructions
the battery charger does not
work or is unsuitable
see battery charger
instructions
there are considerable
differences in density between
the various elements of the
battery
• replace the damaged battery

Table of Contents

Other manuals for IPC Eagle CT15

Related product manuals