Package Contents
Check the following contents of your package:
z
PoE Injector x 1
z
User Guide x 1
z
Power Cord x 1
The label is attached to the bottom of the switch
If any part is lost and damaged, please contact your local agent immediately.
Introduction
PoE Injector
Provides fully complies with IEEE 802.3af/at standard, and can work with all IEEE
802.3af /at PoE compliant PDs (Powered Devices) or PoE Receiver Adapters or other equivalent
product, to expand your network to where there are no power line or outlet, where you
wish to fix device such as AP, IP Camera or IP Phone, etc.
Hardware Description
Front Panel
The front panel composed by PSE output ports with data link port, the relevant indicator, as
shown below:
To Next Page
Loading...