www.iprosecu.com
• Server Time: It shows current IPCam server time.
• Date Format: Select the date display format.
• Time Zone: Select your time zone. It affects server time when you use
“NTP” time.
• Enable Daylight Saving: Give the start and end daylight saving time.
During daylight saving, the time will be 1 hour faster.
• NTP: Key-in the NTP server IP address and update interval. The camera time
will be synchronized with NTP server time. To use this option, if the NTP Server
is under WAN, the camera must be set to access WAN.
• Synchronize with PC’s time: In “Date” and “Time” column it shows your current
PC time. Click “Apply” to make the camera time the same with PC time.
• Manual: Key-in the date and time, and click “Apply”.
• The date and time remain the same: After you select “Synchronize with PC’s
time” or “Manual”, and click “Apply”, the selected mark will jump to this option.
2. User Management
IP CAMERA supports three different users, administrator, general user, and
anonymous user.
To Next Page
Loading...