www.iprosecu.com
the system booting.
It will take around 30 seconds to boot the camera.
Release the button when camera finishes proceed.
Plug in the Ethernet cable. Re-login the camera using the default IP
(http://192.168.1.200), and user name (admin), password (admin)
IX. Universal Password
If you forgot the password of your IP camera, you can reset the camera to
factory default, or follow the procedure below to generate a universal password.
Note: Universal password will be valid only when you enable the function in User
Management.
1. First, you need to know the IP address and MAC of your IP camera. You can
use IP Scanner to scan the LAN, and see the IP address and MAC on the side
column.
To Next Page
Loading...