www.iprosecu.com
D. Event List
IP Camera provides multiple event settings.
1. Event Setting
a. Motion Detection
To enable motion detection, please tick "Area 1/2/3". Click "Area 1/2/3" in Area
Setting, and draw an area on the preview screen. When motion in the area is
detected, "Motion!" word will be marked on the live screen, and the camera can
send video or snapshot to specific mail addresses, trigger the output device, or
save video to FTP/ SD card/ Samba.
If you select "save to SD card", the video or snapshot will be saved to SD card. If
To Next Page
Loading...